When an
error message “Replace Toner” pops-up on your screen, then it means the printer
is indicating that the toner is running low. Such type of message makes the
users too much drive up the wall especially when you’re trying to run or take
some urgent prints from the printer. You can use the built-in toner resetting
menu on the printer to bypass the “Replace Toner” message so you can get on
with your business. If you don’t immediately replace the toner, then your
Brother printer might be at risk and your computer will also get damage. To clear-out
this message from the root, simply follow the steps or procedure mentioned in
this blog. When replacing the toner cartridge, you must install a brand new,
unused genuine Brother Printer toner cartridge to reset the toner status.
Solution To Clear The Brother Printer Message “Replace Toner”
If the Brother
printer continues displaying the message Toner Low, Replace Toner or Toner
Ended error indication after installing toner cartridge in your printer, then
follow the steps mentioned below to resolve the issue.
·
Firstly, turn-off your Brother printer
·
Now, open the front cover of the
Brother printer and make sure that it remains open through the whole procedures
·
Press and hold the “Go” button
while turning on your printer. All LEDs are “Turned On” and the Ready LED will
continue to “Turn off”
·
When the Ready “LED Turns Off,”
release the “GO” button. All LEDs will “Turn off” automatically
·
Press and hold the “GO” button
again to turn onToner, Drum, and Error LEDs
·
Press and hold the “GO” button
seven times until the entire LEDs turn off and then the Error LED will
automatically turn on
·
When the “Error LED” stays switched
“On,” then close the front cover. The
Error LED will turn off and then again Ready LED will flash briefly
·
Verify the Ready LED is switched
“On” and the Toner LED is “Off”. Once you’re done, you can now resume doing
your print jobs
·
Then “Close” the printer door
·
“Restart” your printer
Get Reliable Brother Printer Support From Tech-Specialists
After
restarting your Brother printer,it will evidently in a working mode. These above-written
processes are very confusing but help you in efficiently resolving the problem.
This whole procedure is consuming very less time and effortless. But if you
still getting the same error message, then you don’t need to be panic as Brother Printer Support team always
active to assist you.The provided helpline number is accessible all round the
clock so you can feel free to dial on this number at any time and stay tune
with our expert techies.